5. Install the park pawl (702) and the park pawl actuator
bracket (708).
6. Install the park pawl return spring (701).
7. Install the park pawl shaft (700).
Automatic Transmission:
8. Install the manual shift detent spring assembly (711).
9. Install and hand tighten the 14 mm manual shift
detent lever spring bolt (712) and the 16.7 mm park
pawl actuator bracket bolt (715).
Tightening torque
• Tighten the 14 mm manual shift detent lever
spring bolt (712) to 5 N⋅m (44 lb in).
• Tighten the 16.7 mm park pawl actuator
bracket bolt (715) to 10 N⋅m (89 lb in).
10. Install the park pawl actuator rod (709).
5A-291