Second Coast, Second Clutch Hub and
Second Clutch Sprag Disassemble
Reference: "Second Coast, Second Clutch Hub and
Second Clutch Sprag Assembly Removal".
1. Remove the second clutch sprag outer race thrust
washer (506) from the second clutch sprag outer
race assembly (505).
2. Remove the second coast clutch hub (500) from the
second clutch sprag outer race assembly (505).
3. Remove the coast clutch hub thrust washer (501)
from the second clutch sprag outer race assembly
(505).
Automatic Transmission:
4. Remove the second clutch sprag end bearing (502).
5. Remove the second clutch sprag assembly (503).
6. Remove the second clutch end bearing (502).
Reference: "Second Coast, Second Clutch Hub and
Second Clutch Sprag Assemble".
Second Coast, Second Clutch Hub and
Second Clutch Sprag Assemble
Reference: "Second Coast, Second Clutch Hub and
Second Clutch Sprag Disassemble".
Special tool
J 36850 Transjel Lubricant
1. Install the second clutch sprag end bearing (502).
2. Install the second clutch sprag assembly (503)
rotating counter clockwise while installing. If the
sprag assembly will not rotate counter clockwise turn
over and install again.
3. Install the second clutch sprag end bearing (502).
5A-307