Suzuki XL7 2007 Service Manual page 1723

14. Remove the No. 2 rear control valve body assembly
(330), the spacer plate and the gaskets as an
assembly from the rear control valve body assembly
(326).
15. Remove the 3 rear control valve body bolts (333,
335).
16. Remove the rear control valve body assembly (326)
from the middle control valve body assembly (323).
Reference: "Middle Control Valve Body Disassemble".
Reference: "Control Valve Rear Body Disassemble".
Reference: "No. 2 Rear Control Valve Body
Disassemble".
Reference: "Control Valve Front Body Disassemble".
Automatic Transmission:
Middle Control Valve Body Disassemble
Reference: "Control Valve Body Assembly
Disassemble".
WARNING
!
Valve springs can be tightly compressed.
Use care when removing retainers and plugs.
Personal injury could result.
1. Remove the TCC check valve (382).
2. Remove the TCC check valve spring (383).
3. Remove the cooler by-pass valve (381).
4. Remove the cooler by-pass valve spring (380).
5. Remove the 5 accumulator check valve assemblies
(353).
6. Remove the sleeve/bore plug retainer (362).
7. Remove the primary regulator valve sleeve (398).
8. Remove the primary regulator valve plunger (397).
9. Remove the primary regulator valve spring (396).
10. Remove the primary regulator valve (395).
5A-313