Table of Contents
Advertisement
6C-16 Power Assisted Steering System:
Rack and Pinion Outer Tie Rod End Replacement
Callout
Preliminary Procedure
Remove the front tire/wheel assembly. Refer to "Tire and Wheel Removal and Installation: ".
Rack And Pinion Outer Tie Rod End Nut
CAUTION
!
1
Refer to "Fastener Notice: ".
Torque
25 N⋅m (18 lb ft) plus 90 degrees.
Steering Linkage Inner Tie Rod Nut
Procedure
Loosen but do not remove the steering linkage inner tie rod.
2
Tip: To keep the toe alignment in approximately the same location mark the location of the steering
linkage inner tie rod nut on the steering linkage inner tie rod prior to removal.
Component Name
Advertisement
Table of Contents
Troubleshooting
