Table of Contents
Advertisement
Case Cover Assembly Disassemble
Reference: "Case Cover and 1-2 Reverse Clutch
Assembly Removal".
1. Remove the 4, 4-5 clutch apply pipe bolts/screws
(611) and the 2, 4-5 clutch apply pipe retainers (610)
from the transmission case cover.
NOTE
Do not damage the 4-5 clutch apply pipe or
the transmission case cover.
2. Remove the 4-5 clutch apply pipe (609).
Automatic Transmission:
3. Remove the forward/direct clutch housing thrust
bearing race (628) from the transmission case cover.
4. Remove the 3 forward clutch housing fluid seal rings
(607) from the transmission case cover.
5. Remove the 2 forward clutch accumulator cover
bolts/screws (617) and the forward clutch
accumulator cover (616).
6. Remove the following components from the forward
clutch accumulator cover:
– The forward clutch accumulator piston (612)
– The forward clutch accumulator piston fluid seal
ring (613)
– The forward clutch accumulator piston spring
(614)
– The forward clutch accumulator cover seal (615)
Reference: "1-2 Reverse Clutch Disassemble".
5A-277
Advertisement
Table of Contents
Troubleshooting
