Suzuki XL7 2007 Service Manual page 1903

Compressor Clutch Assembly Replacement
Special tool
J 25031-A Three Jaw Puller
J 37872 Universal Spanner Wrench
GE-47849 Clutch Remover
GE-47850 Center Puller
GE-47851 Armature Replacer
Removal Procedure
1. Remove the compressor from the vehicle. Refer to
"Compressor Replacement".
2. Use J 37872 to hold the compressor clutch.
3. Remove the bolt retaining the compressor clutch to
the compressor.
Heating, Ventilation and Air Conditioning:
4. Install GE-47849 to the compressor clutch.
5. Using GE-47849, remove the compressor clutch
from the compressor.
6. Remove the compressor clutch shims from the
compressor shaft.
7. Remove the snap ring from the compressor pulley.
8. Using GE-47850 with J 25031-A, remove the
compressor pulley from the compressor.
7A-89