Table of Contents
Advertisement
5A-166 Automatic Transmission:
3. Connect J 45096 to the vehicle 12V DC power
source by connecting the red battery clip to the
positive, +, battery post on the vehicle and connect
the negative lead to a known good chassis ground.
4. Turn the main power switch to the ON position.
CAUTION
!
Do not overfill the supply vessel. Damage to
the unit may result. To verify the fluid level,
view the LCD screen display while filling the
unit, to ensure the fluid level does not exceed
30 L (32 qt).
5. Fill the supply tank with Dexron®VI through the fill
port.
6. Reinstall and tighten the fill cap.
7. Connect a shop air supply hose to the quick-
disconnect on the rear panel marked SUPPLY AIR.
Determine Minimum Flow Rate
1. From the machine display, identify the temperature
of the automatic transmission fluid that is stored in
the supply vessel of J 45096.
Advertisement
Table of Contents
Troubleshooting
