Table of Contents
Advertisement
5A-286 Automatic Transmission:
3. Install the E-clip into the groove of the third gear
band servo piston pin.
Reference: "Third Gear Band Servo Piston Installation".
Third Gear Band Servo Piston Installation
Reference: "Third Gear Band Servo Piston Assemble".
1. Apply automatic transmission fluid to the third gear
band servo bore in the transmission case.
2. Install the third gear band servo compression spring
(56) and the third gear band servo piston assembly
(57) to the transmission case.
3. Apply automatic transmission fluid to the 2 new third
gear band servo cover O-ring seals (58).
4. Install the third gear band servo cover O-ring seals
(58) onto the third gear band servo cover (59).
5. Install third gear band servo cover (59) into the third
gear band servo bore in the transmission case.
NOTE
If the third gear band servo cover retaining
ring (60) is deformed, replace it.
6. Using snap ring pliers, install the third gear band
servo cover retaining ring (60) while pressing the
third gear band servo cover into the third gear band
servo bore to properly seat the retaining ring.
Reference: "1-2-Reverse Carrier Gear Assembly
Installation".
Advertisement
Table of Contents
Troubleshooting
