Table of Contents
Advertisement
5A-206 Automatic Transmission:
7. Depress the shift control cable adjustment lock (1) to
lock the adjustment.
8. Slide the shift control cable adjustment lock cover (1)
over the adjustment lock.
9. Inspect the operation of the starting system with the
shift lever in each position. The engine should only
crank when the lever is in the PARK or NEUTRAL
position.
Shift Control Cable Bracket Replacement
Special tool
J 36346 Fascia Retainer Remover
Removal Procedure
1. Remove the battery tray. Refer to "Battery Tray
Replacement: ".
2. Using the J 36346, disconnect the shift control cable
(1) from the transaxle range switch lever (4).
3. Depress the shift control cable retainer clip tabs (2)
and remove the shift control cable from the shift
control cable bracket (3).
4. Remove the shift control cable bracket bolts.
5. Remove the shift control cable bracket.
Advertisement
Table of Contents
Troubleshooting
