7A-108 Heating, Ventilation and Air Conditioning:
4. Remove the heater corefrom the HVAC module.
5. Remove the evaporator case assembly screws from
the blower case assembly.
6. Remove the evaporator case assembly from the
blower case assembly.
Installation Procedure
1. Install evaporator case assembly to the blower case
assembly.
CAUTION
!
Refer to "Fastener Notice: ".
2. Install evaporator case assembly screws to the
blower case assembly.
Tightening torque
Tighten the screws to 1.5 N⋅m (13 lb in).
3. Install heater core to the HVAC module.