5A-320 Automatic Transmission:
28. Remove the 1-2 reverse clutch (B5) control valve
(411).
Reference: "Control Valve Rear Body Assemble".
Control Valve Rear Body Assemble
Reference: "Control Valve Rear Body Disassemble".
1. Inspect the rear control valve body (410) casting for
the following conditions:
– Porosity
– Cracks
– Damaged machine surface
– Chips or debris
– Damage to valve bores
2. Inspect all valves, springs, bushings, and clean all
components in clean solvent.
3. Install the 1-2 reverse clutch (B5) control valve (411).
4. Install the lock up relay valve (415).
5. Install the lock up relay valve spring (414).
6. Install the lock up relay control valve plunger (413).
7. Install the lock up relay control valve sleeve (412).