Table of Contents
Advertisement
5A-234 Automatic Transmission:
Input and Output Speed Sensor Removal
Reference: "Transmission Fluid Draining".
NOTE
Do not damage the speed sensors or
transaxle case.
1. Disconnect the input and output speed sensor
harness assembly (71) from the TCM.
2. Disconnect the input and output speed sensor
harness assembly (71) from the output speed sensor
(62) and the input speed sensor (73).
3. Remove the speed sensor bolts (61).
4. Remove the output speed sensor (62) and the input
speed sensor (73).
5. Remove the speed sensors O-rings (63).
6. Inspect the speed sensors for damage.
Transmission Control Module Removal
Reference: "Input and Output Speed Sensor Removal".
1. Remove the three TCM bolts (76).
2. Remove the TCM (75) by sliding off of the manual
shaft detent lever assembly.
Control Valve Body Cover Removal
Reference: "Transmission Control Module Removal".
1. Remove the 9 control valve body cover torx bolts
(28).
2. Remove the control valve body cover (29). Do not
bend the cover flange.
Advertisement
Table of Contents
Troubleshooting
