Clutch Cover, Clutch Disc, Flywheel And Clutch Release System Components; Clutch Cover, Clutch Disc And Flywheel Removal And Installation - Suzuki Liana RH413 Service Manual

Clutch Cover, Clutch Disc, Flywheel and Clutch Release System Components

10
11 23 N m (2.3 kg-m)
1. Release shaft oil seal
: Apply grease 99000-25010 to oil seal lip.
2. Release shaft No.2 bush
: Apply grease 99000-25010 to bush inside.
3. Release shaft
: Apply grease 99000-25010 to contact part with release bearing
4. Release shaft No.1 bush
: Apply grease 99000-25010 to bush inside
5. Release bearing
: Apply grease 99000-25010 to bearing inside diameter.
Clutch Cover, Clutch Disc and Flywheel
Removal and Installation
Removal
1) Dismount transaxle referring to "Manual Transaxle
Unit Dismounting and Remounting in Section 5B".
2) Hold flywheel stationary with special tool and remove
clutch cover bolts (2), clutch cover (1) and clutch
disc.
Special tool
(A): 09924–17811
1
2
3
12
4
5
S3RH0A5306016
I2RH01530022-01
7
6
8 23 N m (2.3 kg-m)
6. Clutch cover
7. Clutch disc
8. Clutch cover bolt
9. Flywheel
10. Release arm
3) When pulling out input shaft bearing (1) from
flywheel (2), use the following special tools.
Special tool
(A): 09921–26020
(B): 09930–30104
Installation
NOTE
Before assembling, make sure that flywheel
surface and pressure plate surface have
been cleaned and dried thoroughly.
Clutch: 5C-10
S3RH0A5306015
9
I2RH01530021-01
11. Release arm nut
12. Release arm bolt
: Do not reuse.
: Tightening torque
I2RH01530023-01