Table of Contents
Advertisement
5-7-13 CCW Limit (4 Words)
Addresses
Format (for Pulses)
5-7-14 Zones (6 Words)
Addresses
0
Note
1. For digits 10
to 10
then the digits would be 10
its would be 10
2. If the CW limit and the CCW limit are both set to "0," they will be treated as if
the maximum value of 9999999 pulses was set regardless of whether the
unit is in pulses, mm, or inches.
Axis
X
Y
This parameter sets the CCW limit in seven digits, as follows:
Pulses:
Millimeters:
Inches:
Note The data unit (pulses, millimeters, inches) and pulse rate are set in parameter
addresses 2026 (X axis) and 6026 (Y axis).
+0 word
+1 word
+2 word
10
+3 word
Example: 1234567 (pulses)
+2 word
+3 word
0
Note
1. For digits 10
to 10
then the digits would be 10
its would be 10
2. If the CW limit and the CCW limit are both set to "0," they will be treated as if
the maximum value of 9999999 pulses was set regardless of whether the
unit is in pulses, mm, or inches.
Axis
X
Y
This parameter sets the CW and CCW zones in seven digits, as follows:
Pulses:
Millimeters:
Inches:
6
, the data unit is pulses. If the data unit was millimeters,
-3
3
to 10
. If the data unit was inches, then the dig-
-4
2
to 10
.
2012
6012 (NC211 only)
0000000 to 9999999
0000.000 to 9999.999
000.0000 to 999.9999
Address
CCW limit
3
2
digit
10
digit
6
10
digit
6
, the data unit is pulses. If the data unit was millimeters,
-3
3
to 10
. If the data unit was inches, then the dig-
-4
2
to 10
.
2013 to 2020
6013 to 6020 (NC211 only)
--9999999 to 9999999
--9999.999 to 9999.999
--999.9999 to 999.9999
Section
Address
1
0
10
digit
10
digit
5
4
10
digit
10
digit
Address
5-7
Advertisement
Table of Contents
