Omron SYSMAC C500-NC113 Operation Manual page 44

Input Connection Example
OMRON C500-NC211 Position Control Unit
The respective inputs are N.O. (normally open) and N.C. (normally closed).
When not used, leave the N.O. input pins open, and the N.C. input pins con-
nected to the power supply. (The NC113 is not provided with the Y axis.)
Output power supply
24-VDC input
560 Ω
1.8 kΩ (1W)
1.8 kΩ (1W)
560 Ω
560 Ω 1.8 kΩ (1W)
560 Ω
1.8 kΩ (1W)
560 Ω
1.8 kΩ (1W)
560 Ω
1.8 kΩ (1W)
Note Connect a switch with an open/close switching capacity of at least 16 mA for
each input.
24 VDC
power
supply
+ --
22
34
Interrupt input
6(X)/28(Y)
Origin proximity
7(X)/29(Y)
Positioning completion input
8(X)/30(Y)
CCW limit input
17(X)/20(Y)
CW limit input
18(X)/21(Y)
Emergency stop input
19
Section 3-3
N.O. input
Either N.O. or N.C. can
be used to match the in-
puts used. They can be
switched by means of pa-
rameter settings.
N.C. input
N.C. input
N.C. input