Sp Frequency Span; Figure 7-241 Sp Syntax - Agilent Technologies 8560E User Manual

Agilent technologies 8560 e-series and ec-series spectrum analyzers

Table of Contents

Language Reference

SP Frequency Span

Figure 7-241

The SP command sets the frequency span. The center frequency does

not change with changes in the frequency span; start and stop

frequencies do change. Setting the frequency span to 0 Hz effectively

allows an amplitude-versus-time mode in which to view signals. This is

especially useful for viewing modulation. Querying SP will leave the

analyzer in center frequency and span mode.