Mkrl Marker To Reference Level; Figure 7-182 Mkrl Syntax - Agilent Technologies 8560E User Manual

MKRL Marker to Reference Level

Syntax
Figure 7-182 MKRL Syntax
Description
The MKRL command sets the reference level to the amplitude of an
active marker. If no marker is active, MKRL places a marker at the
center of the trace and uses that marker amplitude to set the reference
level. This command is not available when in delta marker mode.
Example
10
20
30
40
50
60
Chapter 7
OUTPUT 718;"IP;SNGLS;CF 300MHZ;SP 20MHZ;"
OUTPUT 718;"TS;MKPK HI;MKRL;TS;"
OUTPUT 718;"RL?;AUNITS?;"
ENTER 718 USING "K";Ref_level,Aunits$
PRINT "REFERENCE LEVEL IS",Ref_level,Aunits$
END
Language Reference
MKRL Marker to Reference Level
535