Table of Contents
Advertisement
E Puts the spectrum analyzer in single sweep.
SINGLE MEASUR
Completes the current measurement and stops further
measurements from occurring. If the measurement is
already stopped, it is re-started and one measurement
is completed.
Front-panel key access:
SOURCE CAL MENU
calibrate for frequency-response errors in test setups.
Thru calibration is used when making transmission
measurements, and open/short average calibration is
used when making reflection measurements.
Front-panel key access:
Places a blank space in the next available character
SPACE
position in the title.
Front-panel key access:
SPACING/BANDWDTH
channel spacing and channel bandwidth when making
adjacent channel power measurements.
Front-panel key access:
Activates the span function and sets the spectrum
SPAN
analyzer to center-frequency span mode. A span hard
key and a span softkey are available. The
key also accesses SPAN, SPAN ZOOM, FULL SPAN,
ZERO SPAN, and LAST SPAN. The span setting can be
changed using the data keys, the step keys, or the knob.
The span can be set to 0 Hz using either the data keys
or ZERO SPAN.
Front-panel key access:
Tracks a marked signal and activates the span
SPAN ZOOM
function. If no marker is active, an active marker is
positioned at the highest peak, signal track is turned
on, and SPAN is made the active function. Once the
span is entered and the new span is reached, the
marker and signal track both remain on with SPAN as
the active function. Therefore, keying in consecutive
frequency span values continues to activate the
span-zoom function. To deactivate the span-zoom
function, press
set SIG TRK ON OFF to OFF.
Front-panel key access:
Chapter 4
MEAS/USER
Accesses a menu of softkeys that allow you to
AUX CTRL
DISPLAY
Accesses the functions that allow you to change
MEAS/USER
SPAN
, and then press MARKERS OFF, or
MKR
SPAN
Key Function Descriptions
Key Descriptions
hard
SPAN
279
Advertisement
Table of Contents
