Quick Start Guide
Making a Basic Measurement
4. Set the amplitude.
a. Generally, placing the signal peak at the reference level provides
b. Because the marker is active, a faster method to fine-tune the
−10 dBm Reference Level
Figure 1-8
34
the best measurement accuracy. To adjust the signal peak to the
reference level ( Figure 1-8), press
dBm, or use either the step keys or the knob.
Using the knob is the easiest way to fine-tune the signal peak to
the reference level, which is located at the top of the graticule.
signal peak to the reference level is to press
which is located under the
reference level equal to the marker amplitude value.
. Then key in −10
AMPLITUDE
MARKER → REF LVL
MKR →
key. This function sets the
,
Chapter 1