Agilent Technologies 8560E User Manual page 362

Agilent technologies 8560 e-series and ec-series spectrum analyzers

Table of Contents

Programming Command Cross Reference

Programming Command Versus Front Panel Key

Agilent 8566A and Agilent 8568A Compatible

This is a list of commands from the Agilent 8566A and Agilent 8568A

spectrum analyzers that use the same mnemonic as the 8560 E- Series

and EC-Series. The preferred 8560 E-Series and EC-Series mnemonic is

also listed. Other commands may have the same mnemonic, but their

results may differ slightly.

This command compatibility allows programs that were originally

written for the Agilent 8566A and Agilent 8568A spectrum analyzers to

be used with the 8560 E-Series and EC-Series spectrum analyzers, with

only minor modiﬁcations. We recommend that you do not use the old

Agilent 8566A/8568A commands when writing new programs for the

8560 E-Series and EC-Series.

Backward-Compatible Commands

Preferred Agilent 8560

E-Series and EC-Series

Clear-Write Trace A

Maximum Hold Trace A

Store-View Trace A

Blank Trace A

Clear-Write Trace B

Maximum Hold Trace B

Store-View Trace B

Blank Trace B

Trace B minus Display Line

Trace A minus Trace B off

Trace A minus Trace B on

Couples the RF attenuator

Couples the resolution bandwidth

Couples the center frequency step

Couples the sweep time

Couples the video bandwidth