Table of Contents
Advertisement
Key Function Descriptions
Key Descriptions
When DSP is selected, the analyzer scales the full
display (excluding the softkey area), so that the
corresponding hardcopy plot resides completely within
the user-defined P1 and P2 limits.
When GRAT is selected, P1 and P2 correspond to the
lower-left and upper-right corners of the graticule. If a
full plot is activated using
scaled according to the P1 and P2 parameters; however,
the annotation will be plotted outside the defined
range. GRAT allows you to position the desired plot
information on a preprinted graticule to save plotting
time.
This softkey function is locked out when any plot is in
progress or pending.
Front-panel key access:
Plots only the contents of trace A and any markers
PLOT TRACE A
associated with trace A. When PLOT TRACE A is
active, STOP TRACE A appears in its place, allowing
you to stop the plot before it is finished. If trace A is
blanked, the message TRACE IS BLANKED will
momentarily appear in the active function area, and no
plotting will occur.
Front-panel key access:
Plots only the contents of trace B and any markers
PLOT TRACE B
associated with trace B. When PLOT TRACE B is
active, STOP TRACE B appears in its place, allowing
you to stop the plot before it is finished. If trace B is
blanked, the message TRACE IS BLANKED will
momentarily appear in the active function area, and no
plotting will occur.
Front-panel key access:
PLOTTER ADDRESS
new address can be entered by using the data keys (and
pressing
pressing STORE HPIB ADR. The new address is stored
in nonvolatile memory and is recalled when the power
is cycled. If the plotter address is redefined without
saving it with STORE HPIB ADR, the new address will
still be valid after
the power is turned off. The PLOTTER ADDRESS
softkey is not displayed whenever a plot is pending or
in progress.
Front-panel key access:
260
CONFIG
CONFIG
CONFIG
Displays the current GPIB address of the plotter. A
), the step keys, or the knob, and
ENTER
PRESET
CONFIG
, the graticule will be
COPY
is pressed, but will be lost if
Chapter 4
Advertisement
Table of Contents
