Options - Agilent Technologies 8560E User Manual

Options and Accessories

Options

Options
Options tailor the spectrum analyzer to your needs. Order options by
the option number when you order the analyzer. Some options are
available as kits, which may be ordered and installed after you receive
your instrument.
Second IF output (Option 001) provides an output for the second IF
(310.7 MHz) at rear-panel connector J10. Not available
with Option 327.
Tracking generator
(Option 002) provides a built-in 300 kHz to 2.9 GHz source that
tracks the spectrum analyzer sweep. Option 002 is only
available on the Agilent 8560E and the 8560EC. It is
not available with Option 005.
Alternate sweep output
(Option 005) provides a 0 V to 10 V sweep ramp with 0 V
corresponding to the left portion of the display and 10 V
corresponding to the right portion of the display. Option
005 is not available with Option 002 or Option 327.
Frequency coverage down to 30 Hz
(Option 006) extends the frequency range of the Agilent 8563E/EC,
Agilent 8564E/EC, and Agilent 8565E/EC from the
standard 9 kHz down to 30 Hz.
Fast time domain sweeps
(Option 007) allows digitized sweep times as fast as 50 µs in spans of
0 Hz. Not available with Option 327.
Signal identification (Option 008) provides signal identification
capability for use with unpreselected external mixers.
Not available with Option 327.
APC 3.5 mm input connector
(Option 026) provides an APC 3.5 mm input connector on the Agilent
8563E/EC.
Soft carrying case (Option 042) provides a soft carrying case with a
strap and a pouch for accessories. It is used to provide
additional protection during travel.
Delete precision frequency reference
(Option 103) deletes the ovenized oscillator used for improved
frequency accuracy and replaces it with a temperature
compensated crystal oscillator (TCXO). The minimum
resolution bandwidth is changed from 1 Hz to 10 Hz.
656 Chapter 8