Agilent Technologies 8560E User Manual page 188

Key Function Descriptions
Key Function Tables
Table 4-2 Instrument State Functions
Instrument State
Keys
AMPCOR MENU
AMPCOR ON OFF
AMPTD CORRECT
ANALOG METHOD
ANALYZER ADDRESS
AUX CTRL
AVERAGE CNV LOSS
AVG "OFF" POWER
AVG "ON" POWER
BW
BIAS
BIAS OFF
BURST/WEIGHTNG
BURST PERIOD
BURST WIDTH
BURST PWR METHOD
CAL
CAL OPN/SHRT
188
Description
Access Key
CAL Accesses functions that allow you to enter amplitude
correction (ampcor) factors to correct system flatness.
CAL Turns the amplitude correction factors on and off.
When this mode is selected, a W appears on the left side
of the display.
AUX CTRL Accesses functions that set conversion loss and
flatness data for external mixer measurements.
MEAS/USER Makes adjacent channel power (ACP) measurements
by measuring continuous power integration versus
frequency.
CONFIG Displays the current GPIB address of the spectrum
analyzer.
— Accesses a menu of tracking generator, internal mixer,
external mixer, demodulation, and rear-panel
functions.
AUX CTRL Displays the mean conversion loss for the current
harmonic and allows you to enter new conversion loss
data.
MEAS/USER Measures the power of the carrier when the burst is
off.
MEAS/USER Measures the power of the carrier when the burst is
on.
Selects a monochromatic printer configuration for use
CONFIG
with COPY.
Displays a menu of functions for selecting
AUX CTRL
external-mixer bias for unpreselected external mixers.
Turns external mixer bias off.
AUX CTRL
MEAS/USER Accesses functions that allow you to change the burst
width and period for ACP measurements.
Sets the burst period for ACP measurements.
MEAS/USER
MEAS/USER Sets the burst width for ACP measurements.
Makes adjacent channel power (ACP) measurements
MEAS/USER
on burst signals.
— Accesses a menu of calibration functions.
AUX CTRL Measures and computes the average of an open- and a
shorted-input calibration, then stores the data in trace
B and in instrument state register 8.
Chapter 4