Adjall Lo And If Adjustments; Figure 7-40 Adjall Syntax - Agilent Technologies 8560E User Manual

ADJALL LO and IF Adjustments

Syntax
Figure 7-40 ADJALL Syntax
Description
The ADJALL command activates the RF local oscillator (LO) and
intermediate frequency (IF) alignment routines. These are the same
routines that occur when the spectrum analyzer is switched on.
Commands following ADJALL are not executed until after the analyzer
has finished the alignment routines.
Example
10
20
Chapter 7
OUTPUT 718;"ADJALL;"
END
Language Reference
ADJALL LO and IF Adjustments
407