Agilent Technologies 8560E User Manual page 196

Key Function Descriptions
Key Function Tables
Table 4-2 Instrument State Functions
Instrument State
Keys
SOURCE CAL MENU
SPACING/BANDWDTH
SQUELCH ON OFF
SRC PWR OFFSET
SRC PWR ON OFF
SRC PWR STP SIZE
SWP CPL SR SA
TRACKING
GENRATOR
TRACKING PEAK
V/GHz .25 .50
VIEW TBL TRAC
WEIGHT α
WEIGHT T
WEIGHTING √COS
OFF
196
Description
Access Key
AUX CTRL Accesses a menu of functions used to calibrate
frequency response errors in test setups when using a
tracking generator.
Accesses the channel spacing and channel bandwidth
MEAS/USER
softkeys for use in adjacent channel power (ACP)
measurements.
Turns squelch on and off and adjusts the squelch level
AUX CTRL
for demodulation.
AUX CTRL Offsets the displayed power of the tracking generator.
AUX CTRL Switches the tracking generator output power on and
off. A G appears on the left side of the display when this
function is active. 8560E/EC Option 002 only.
AUX CTRL Sets the step size of the source power level, the source
power offset, and the power sweep range function.
Selects an auto-coupled sweep time equation for
AUX CTRL
stimulus-response (SR) measurements or for spectrum
analyzer (SA) measurements. When SR mode is
selected, an E appears on the left side of the display.
AUX CTRL Accesses a menu of tracking generator functions.
Adjusts the coarse and fine tracking adjustments to
AUX CTRL
peak the tracking generator response on the spectrum
analyzer display automatically.
Selects a 0.25 V/GHz or 0.5 V/GHz output for
AUX CTRL
connector J8 on the rear panel. This output is
primarily used with external tracking generators or
preselected external mixers.
MEAS/USER Sets the display to show a table of the ACP
measurement results or to show a trace.
Enters the α factor for root-raised-cosine weighting on
MEAS/USER
an ACP measurement.
Enters the T factor for root-raised-cosine weighting on
MEAS/USER
an ACP measurement.
MEAS/USER Turns on and off root-raised-cosine weighting for an
ACP measurement.
Chapter 4