Table of Contents
Advertisement
Selects absolute decibels relative to 1 milliwatt as the
dBm
amplitude units.
Front-panel key access:
Selects absolute decibels relative to 1 µvolt as the
dBµV
amplitude units.
Front-panel key access:
Selects absolute decibels relative to 1 millivolt as the
dBmV
amplitude units.
Front-panel key access:
DELETE
Deletes the currently selected frequency-amplitude
CORR PT
correction pair from the list of correction points. The
display of correction point data and the applied
correction is updated as soon as the key is pressed. If
there are no correction points in the list, or if the
currently selected point is a new point past the end of
the list, no action is taken.
Front-panel key access:
DEMOD
Adjusts the duration of demodulation between
TIME
successive sweeps when the span is greater than 0 Hz.
The time ranges from 0.1 seconds to 60 seconds; the
default value is 1 second. When the frequency span
equals 0 Hz, demodulation is continuous, except for
transients during retrace. To avoid these transients, set
the analyzer to external trigger mode, but do not supply
a trigger input.
Front-panel key access:
DETECTOR
Accesses a menu of detector modes, which include
MODES
normal, sample, and positive or negative peak
detection. When any detector mode other than
NORMAL is active, a D appears on the left edge of the
display.
Front-panel key access:
Chapter 4
Key Function Descriptions
Key Descriptions
AMPLITUDE
AMPLITUDE
AMPLITUDE
CAL
AUX CTRL
TRACE
231
Advertisement
Table of Contents
