Agilent Technologies 8560E User Manual page 267

PRINTER CONFIG
If the printer is not connected when any of the print functions are
NOTE
executed, then the message CONNECT PRINTER appears in the active
function block.
PURGE CORR
PWR MENU HELP
PWR ON STATE
PWR SWP ON OFF
Chapter 4
Front-panel key access:
Accesses printer configuration options to set the
printer address and to select a black-and-white or color
printer.
Front-panel key access:
Allows you to delete the entire table of
frequency-amplitude correction points currently being
edited.
Front-panel key access:
Includes measurement information for making
occupied power bandwidth, channel power, carrier
power, and adjacent channel power measurements.
Front-panel key access:
Saves the current instrument state in the power-on
register. The spectrum analyzer is then set to this state
whenever is switched on. The same state can be
LINE
retrieved with POWER ON, available from the
menu.
Front-panel key access:
For 8560E/EC Option 002. Activates (ON) or
deactivates (OFF) the power-sweep function, where the
output power of the tracking generator is swept over
the power-sweep range chosen. The value of the
power-sweep range is displayed in the active function
block, when PWR SWP ON OFF is turned on. The
power-sweep range can be set from 0 to 12.8 dB;
however, the power-sweep range specified under
warranty is 10 dB. It can be adjusted using the data
keys, step keys, or knob.
The output power of the tracking generator is swept
according to the sweep rate of the spectrum analyzer.
Power-sweep measurements are particularly useful in
making gain compression or output power versus
frequency measurements.
Front-panel key access:
Key Function Descriptions
Key Descriptions
CONFIG
CONFIG
CAL
MEAS/USER
SAVE
AUX CTRL
RECALL
267