Language Reference
ACPRSLTS Adjacent Channel Power Measurement Results
ACPRSLTS Adjacent Channel Power
Measurement Results
Syntax
Figure 7-32
ACPRSLTS Syntax
Description
The ACPRSLTS command returns an array of power data resulting
from an adjacent channel power measurement of an RF signal. The size
of the array is determined by the number of alternate channel pairs
selected by the ACPALTCH command. (The default is 0.)
Power measurements and calculations are made for the selected
channels. Different measurement methods (that is, ANALOG, 2BW)
provide different power measurements. These power ratios are
described below:
ACP Ratio
Random Power It is a measure of the power (usually noise-like) that
Impulsive Power It is the peak power of the leading or falling edge
Weighted Power It is a summed combination of the random power and
Average Power It is a measure of all the power in the pulse of a burst
400
It is a measure of the channel power that is done as a
continuous integration.
exists between the leading and falling edge transients
of a burst signal.
(whichever is higher) of a burst signal.
impulsive power.
signal. This value is only available if the burst power
method is selected.
Chapter 7