Agilent Technologies 8560E User Manual page 193

Table 4-2 Instrument State Functions
Instrument State
Keys
PLOT TRACE A
PLOT TRACE B
PLOTTER ADDRESS
PLOTTER CONFIG
POSITIVE BIAS
POSTSCLR
POWER MENU
POWER ON
PRESEL AUTO PK
PRESEL MAN ADJ
PRESEL PEAK
PRESET
PRINTER ADDRESS
PRINTER CONFIG
PURGE CORR
PWR MENU HELP
Chapter 4
Description
Access Key
CONFIG Plots only the contents of trace A and any markers
associated with the trace. To halt plotting before it is
complete, press STOP TRACE A.
Plots only the contents of trace B and any markers
CONFIG
associated with the trace. To halt plotting before it is
complete, press STOP TRACE B.
Displays the GPIB address of the plotter. After
CONFIG
changing and entering the address, press STORE
GPIB ADR.
Accesses a menu for configuring a plotter as a
CONFIG
hard-copy device.
Selects positive mixer bias for an external mixer. When
AUX CTRL
this function is selected, a "+" appears on the left side
of the display. Not available with an 8560E/EC Option
002.
CAL Displays the value of the post scaler divider within the
fractional N assembly.
Accesses the power measurements including occupied
MEAS/USER
power bandwidth, channel power and carrier power.
Sets the instrument state to the state stored in the
RECALL
power-on register.
AUX CTRL Automatically peaks the preselector for the selected
signal on a trace.
AUX CTRL Permits manual adjustment of the preselector. Peak
the preselector using the data keys, the step keys, or
the knob.
AUX CTRL Displays a menu of functions for preselected external
mixers.
— Sets the spectrum analyzer to the preset state.
Displays the GPIB address of the printer. After
CONFIG
changing the address, press STORE HPIB ADR.
CONFIG Accesses a menu for configuring a printer as a
hard-copy device.
CAL Allows you to purge all of the ampcor correction points
that are in active memory.
MEAS/USER Includes measurement information for making
occupied power bandwidth, channel power, carrier
power, and adjacent channel power measurements.
Key Function Descriptions
Key Function Tables
193