Agilent Technologies 8560E User Manual page 241

Agilent technologies 8560 e-series and ec-series spectrum analyzers

Table of Contents

Sets the spectrum analyzer to the center-frequency

span mode and sets the span to the maximum range.

Full span is:

Spectrum Analyzer

Agilent 8561E/EC

Agilent 8562E/EC

Agilent 8563E/EC

Agilent 8564E/EC

Agilent 8565E/EC

Front-panel key access:

Blanks the graticule from the display (OFF) or

reactivates it (ON).

Front-panel key access:

GATE CTL EDGE LVL

triggering to control the gate. In edge mode the gate

delay starts from the speciﬁed trigger edge. The gate is

then on for the time speciﬁed by the gate length

In level mode the gate is controlled by the level of the

input trigger signal, so gate delay and gate length are

not functional.

Front-panel key access:

Controls the length of time from the trigger until the

gate is turned on. The second line of the softkey

indicates the current setting of the gate delay.

Front-panel key access:

Controls the length of time that the gate is on when

using edge triggering to control the gate. The second

line of the softkey indicates the current setting of the

gate length.

Front-panel key access:

Turns the gate function on and off. When set ON, the

analyzer activates the gate circuitry to function

according to the parameters controlled by gate length,

gate delay, and the gate trigger input.

Selects the use of edge triggering or level

Key Function Descriptions

Key Descriptions

Frequency Span