Table of Contents
Advertisement
Language Reference
RCLT Recall Trace
RCLT Recall Trace
Syntax
Figure 7-223
RCLT Syntax
Description
The RCLT command recalls previously saved trace data to the display.
See SAVET.
Parameters
TRA
TRB
number
Example
10
20
30
40
50
576
recalls the trace data to trace A.
recalls the trace data to trace B.
integer from 0 to 7. If a Agilent 85620A mass memory
module is attached to the spectrum analyzer, trace
registers 5, 6, and 7 are used by the Agilent 85620A
mass memory module. Numbers less than zero default
to zero; numbers greater than seven default to seven.
OUTPUT 718;"IP;CF 300MHZ;SP 20MHZ;"
OUTPUT 718;"SAVET TRA,7;"
OUTPUT 718;"IP;"
OUTPUT 718;"RCLT TRB,7;"
END
Chapter 7
Advertisement
Table of Contents
