Agilent Technologies 8560E User Manual page 356

Programming Command Cross Reference
Programming Command Versus Front Panel Key
Table 6-2 Programming Command Functional Index
Function
Category
DISPLAY
FREQUENCY
FREQUENCY
COUNT
HOLD
INFORMATION
AND SERVICE
DIAGNOSTICS
356
Command Corresponding Key
Function
ANNOT ANNOT ON OFF
BLANK BLANK A BLANK B
DL DSPL LIN ON OFF
FDSP
FREQ DSP OFF
GRAT
GRAT ON OFF
TH THRESHLD ON OFF
TITLE SCREEN TITLE
CF CENTER FREQ
FA START FREQ
FB STOP FREQ
FOFFSET
FREQ OFFSET
SS
CF STEP AUTO MAN
MKFC
COUNTER ON OFF
MKFCR COUNTER RES
MKD MARKER DELTA
MKN MARKER NORMAL
MKPX PEAK EXCURSN
HD HOLD
ADJALL REALIGN LO &IF
ADJCRT
CRT ADJ PATTERN
ADJIF
FULL IF ADJ
DONE
ERR RECALL ERRORS
ET ELAPSED TIME
FDIAG FREQ DIAGNOSE
ID DATECODE &OPTIONS
Description
Turns annotation on or off.
Stores and blanks specified trace
register (A4 and B4).
Specifies display-line level in dBm,
and turns the display line on or off.
(L0)
Turns all frequency display
annotation off.
Turns graticule on or off.
Specifies display threshold value.
Writes specified ASCII characters
in title block area of display.
Specifies center frequency.
Specifies start frequency.
Specifies stop frequency.
Specifies frequency offset.
Specifies center-frequency
step-size.
Turns the frequency counter on or
off.
Specifies resolution of the
frequency counter.
Moves delta marker to specified
frequency (M3).
Moves marker to specified
frequency or center screen (M2).
Specifies minimum excursion for
peak identification.
Holds or disables data entry and
blanks active function display
readout.
Initiates power-on adjustment
sequence.
Initiates CRT adjustment
patterns.
Initiates IF adjustment sequence.
Returns a 1 when task has been
completed.
Returns list of instrument error
codes.
Returns elapsed time.
Returns frequency of specified
oscillator.
Returns the model number of
analyzer used.
Chapter 6