Agilent Technologies 8560E User Manual page 367

Table 6-4 Mass Memory Module Commands
OR
OUTPUT
PA
PD
PDA
PDF
PEAKS
PR
PU
RELHPIB
REPEAT
UNTIL
RETURN
RMS
SADD
SDEL
SDON
SEDI
SENTER
SETDATE
SETTIME
SHOWMENU
SKYCLR
SKYDEF
SMOOTH
SQR
STDEV
SUB
Chapter 6
Programming Command Versus Front Panel Key
Sets the origin.
Allows the spectrum analyzer to send data to other devices on
the GPIB.
Moves the pen to a vector location on the spectrum analyzer
screen relative to the reference coordinates (0,0).
Instructs the spectrum analyzer to plot vectors on the spectrum
analyzer screen until a PU command is received.
Sums the probability distribution of amplitude in the
destination trace with the amplitude distribution function of
the source trace.
Increments an element of the destination trace whenever the
corresponding element of the source trace exceeds a threshold.
Sorts signal peaks by frequency or amplitude, stores the results
in the destination trace, and returns the number of peaks
found.
Moves the pen to a new plot location on the spectrum analyzer
screen relative to the current coordinates in display units.
Instructs the spectrum analyzer not to plot vectors on the
spectrum analyzer screen until a PD command is received.
Releases spectrum analyzer control of the GPIB.
Forms a looping construct.
Stops the operation of a user-defined command and returns
program operation to the point where the user-defined function
was called.
Returns the root mean square value of the trace in
measurement units.
Adds a limit-line segment.
Deletes the limit-line segment.
Indicates that the limit-line segment is done.
Edits the limit-line segment.
Enters the limit-line segment into the limit-line table.
Sets the date of the real-time clock.
Sets the time of the real-time clock.
Shows menu.
Clears user softkey.
Defines user softkey.
Smooths the trace according to the number of points specified
for the running average.
Places the square root of the source into the destination.
Returns the standard deviation of the trace amplitude in
measurement units.
Subtracts source 2 from source 1, point by point, and sends the
difference to the destination.
Programming Command Cross Reference
367