Figure 2-24 Intermodulation Distortion Measured In Dbc - Agilent Technologies 8560E User Manual

13.To measure a distortion product:
The difference in frequency and amplitude between the two markers is
displayed in the active function block.
Figure 2-24 Intermodulation Distortion Measured in dBc
Create a title for the measurement
The screen title function lets you create a title on the screen, and a label
for the recall menu.
14.To create a title:
Chapter 2
a. Press
PEAK SEARCH
b. To activate a second marker, press
c. Press
NEXT PK LEFT
on the peak of the distortion product that is beside the signal
source (see Figure 2-24).
a. Press ,
DISPLAY SCREEN TITLE
b. Use the softkeys from the screen-title menu and the knob (to
choose the letters) to create a title. The title appears in the
upper-right corner of the graticule; it can be up to two rows of 16
characters each (see Figure 2-25).
c. Press
TITLE DONE
Example 5: Third-Order Intermodulation Distortion
to place a marker on a source signal.
MARKER DELTA
or
NEXT PK RIGHT
.
when the title is complete.
Making Measurements
.
to set the second marker
79