Agilent Technologies 8560E User Manual page 657

Delete mass memory module (Option 104) deletes the module
used to expand user memory which allows storage and
execution of downloadable programs (DLPs) and limit
lines.
Delete IF input and video output (Option 327) deletes the
front-panel IF input connector and the rear-panel video
output connector.
Refurbished 8560 E-Series (Option 8ZE) provides refurbished
spectrum analyzers at a reduced cost.
Rack-mount flange kit
(Option 908) provides the parts necessary to mount the analyzer in
an Agilent System II cabinet in a standard 19 inch
(482.6 mm) equipment rack. Option 908 is also
available as a kit (part number 5062-4841). The
instrument dimensions, without handles or flanges, are
222 mm (h) × 422 mm (d) × 425 mm (w).
Rack-mount flange kit with handles
(Option 909) is the same as Option 908 but includes front handles for
added convenience. Option 909 is also available as a kit
(part number 5062-4840). The instrument dimensions,
without handles or flanges, are 222 mm (h) × 422 mm
(d) × 425 mm (w).
Additional manual set (Option 910) provides an additional manual
set shipped with the analyzer. This option includes a
copy of the Installation and Verification Manual, the
Operating and Programming Manual, the Mass
Memory Module Manual, and the Quick Reference
Guide. To order additional manuals after initial
shipment, use manual part numbers that appear on the
title page.
Service documentation (Option 915) provides service guide and
component level information for troubleshooting and
repair of the analyzer.
Additional quick reference guide (Option 916) provides an
additional copy of the Quick Reference Guide. To obtain
a copy of the Quick Reference Guide after initial
shipment, order by the manual part number, which
appears on the title page.
MIL 45662A calibration (Option 1BN) spectrum analyzer ships
with a MIL STD 45662A calibration certificate.
MIL 45662A calibration with test data
(Option 1BP) spectrum analyzer is shipped with a MIL STD 45662A
calibration certificate that includes the calibration test
data.
Chapter 8
Options and Accessories
Options
657