Ts Take Sweep; Figure 7-285 Ts Syntax - Agilent Technologies 8560E User Manual

Agilent technologies 8560 e-series and ec-series spectrum analyzers

Table of Contents

Language Reference

TS Take Sweep

Figure 7-285

TS commands the spectrum analyzer to take one full sweep across the

trace display. Commands following TS are not executed until after the

analyzer has ﬁnished the trace sweep. (This ensures that the

instrument is set to a known condition before subsequent commands

are executed.) For information on how to synchronize a program using

TS and the DONE command, refer to Chapter 5.

OUTPUT 718;"IP;SNGLS;"

OUTPUT 718;"TS;DONE?;"

ENTER 718;Done