Table of Contents
Advertisement
Options and Accessories
Accessories Available
Agilent 85671A Phase Noise Measurement Utility is a software
measurement utility that makes it easy to use the
spectrum analyzer to make phase noise measurements.
Agilent 85672A Spurious Response Measurements Utility is a
software measurement utility that makes it easy to use
the spectrum analyzer to make TOI/IMD, harmonics,
general spurious, sidebands, and mixer measurements.
Agilent 85700A RAM memory card provides 32 Kbytes of RAM
memory; the Agilent 85702A provides 128 Kbytes of
RAM memory.
Agilent 85710A Digital Radio Personality is a software
measurement personality that makes it easy to use the
spectrum analyzer to make measurements on digital
radio systems. It is simple to characterize spectral
occupancy on microwave terrestrial links, to do mask
comparisons, to measure frequency response, and to do
transient analysis.
Agilent 11940A and Agilent 11941A close field probes are small,
hand-held, electromagnetic-field sensors. The Agilent
11940A close-field probe provides repeatable, absolute,
magnetic-field measurements from 30 MHz to 1 GHz (9
kHz to 30 MHz with the Agilent 11941A). When
attached to a source, the probe generates a localized
magnetic field for electromagnetic interference (EMI)
susceptibility testing.
Agilent 11945A close field probe set includes both the Agilent
11940A and Agilent 11941A probes for full coverage
from 9 kHz to 1 GHz. Option E51 adds the Agilent
8447F Option H64 dual preamplifier, a 36 inch (914
mm) Type-N cable, and a carrying bag for storage and
protection of the entire set.
Agilent 11687A 75 to 50 ohm adapter allows you to make
measurements in 75-ohm systems. Amplitude
calibration is retained by using the reference level
offset to compensate for the loss through the pad. It is
effective over a frequency range of dc to 1.3 GHz.
Agilent 11693A microwave limiter protects the spectrum analyzer
input circuits from damage due to high power levels
and operates over a frequency range of 0.4 to 12.4 GHz.
Agilent 11742A dc blocking capacitor protects the spectrum
analyzer input circuits from damage due to the
presence of dc voltages on the input signal. It blocks up
to 50 Vdc at frequencies from 10 MHz to 26.5 GHz.
662
Chapter 8
Advertisement
Table of Contents
