Figure 2-26 Am And Fm Demodulation Test Setup; Figure 2-27 Fm Band - Agilent Technologies 8560E User Manual

Making Measurements
Example 6: AM and FM Demodulation
Figure 2-26 AM and FM Demodulation Test Setup
Set the start and stop frequencies
2. Tune to the FM band by setting the start frequency of the spectrum
Figure 2-27 FM Band
Set a marker
3. To demodulate an FM signal, you must activate a marker before you
82
analyzer to 88 MHz, and the stop frequency to 108 MHz:
a. Press
FREQUENCY
b. Press
START FREQ
c. Press ; enter 108 MHz (see Figure 2-27).
STOP FREQ
turn on the demodulator. For your convenience, the AM and FM
demodulation menu contains the marker functions.
.
; enter 88 MHz.
Chapter 2