Agilent Technologies 8560E User Manual page 700

If You Have a Problem
Error Messages
RBW <300 Unable to adjust less than 300 Hz RES BWs.
ERR 528
DC level at ADC cannot be calibrated.
RBW <300 Unable to adjust less than 300 Hz RES BWs.
ERR 529
Demod data for calibration is bad.
RBW <300 Unable to adjust less than 300 Hz RES BWs.
ERR 530
Narrow BW VCXO Calibration failed.
RBW <300 Flatness correction data not acceptable for less
ERR 531
than 300 Hz RES BWs.
RBW <300 Absolute gain data for less than 300 Hz RES
ERR 532
BWs not acceptable.
RBW <300 Unable to adjust less than 300 Hz RES BWs.
ERR 533
Timeout during data sampling narrow BW chunk.
RBW <300 Unable to adjust less than 300 Hz RES BWs.
ERR 534
Frequency count of CAL OSC using IF downconverter
failed.
RBW <300 Unable to adjust less than 300 Hz RES BWs.
ERR 535
Inadequate FM demod range for 500Hz IF filter
measurement.
RBW <300 Unable to adjust less than 300 Hz RES BWs.
ERR 536
Unable to autorange the chirp signal.
RBW <300 Unable to adjust less than 300 Hz RES BWs.
ERR 537
CW CAL OSC not autoranging.
RBW <300 Unable to adjust less than 300 Hz RES BWs.
ERR 538
Noisy shape of 500 Hz IF filter.
RBW <300 Unable to adjust less than 300 Hz RES BWs.
ERR 539
CW CAL OSC not autoranging.
RBW <300 Unable to adjust less than 300 Hz RES BWs.
ERR 540
No SIGLOCK on CW CAL OSC during pretune.
IDCALOSC CAL Oscillator ID. Indicates incompatible
ERR 550
hardware. Cal oscillator not expected.
ID LOGBD LOG Board ID. Indicates incompatible
ERR 551
hardware. Log board not expected.
LOG AMPL Unable to adjust amplitude of log scale.
ERR 552
LOG AMPL Unable to adjust amplitude of log scale.
ERR 553
LOG AMPL Unable to adjust amplitude of log scale.
ERR 554
LOG AMPL Unable to adjust amplitude in log scale.
ERR 555
LOG AMPL Unable to adjust amplitude in log scale.
ERR 556
LOG AMPL Unable to adjust amplitude in log scale.
ERR 557
700 Chapter 9