Agilent Technologies 8560E User Manual page 663

Agilent technologies 8560 e-series and ec-series spectrum analyzers
Table of Contents

Advertisement

part number 8120-6164 50 GHz RF cable is used for connecting the
device under test to the RF input of the spectrum
analyzer. This 50 Ω cable has less than 5.7 dB of loss at
50 GHz. It is 1 meter long with 2.4 mm (male) and 2.4
mm (female) connectors.
Agilent 10833A/B/C/D GPIB cable is used for connecting GPIB
devices.
ITEL-45CHVUB (U.S. and CAN) and ITEL-45CHVEB
(International) GPIB to Centronics converters convert GPIB to
Centronics interface allowing a GPIB instrument or
computer to print data, text, and graphics to HP
Centronics parallel printers.
Controllers
The spectrum analyzer is fully GPIB programmable.
The preferred controllers are HP 9000 Series 300
computers. Consult your local Agilent Technologies
service representative for other recommended
controllers and available software.
HP ColorPro 7440A graphics plotter adds color printout capability
to the analyzer for permanent records of important
measurements. The eight-pen HP ColorPro produces
color plots with 0.025 mm (0.001 in) resolution on
either 8.5- by 11-inch paper or transparency film. Other
GPIB plotters are available from Agilent Technologies.
Printers
The HP 2225A ThinkJet or the HP 3630A PaintJet
printers may be used with the spectrum analyzer.
Agilent 85901A portable AC power source can be used as a
standalone battery for over one hour of operation at 100
W continuous load, or can be connected to an external
12 Vdc source for longer use. It can be recharged in six
hours or less.
Agilent 41800A active probe is a high-input impedance probe that
covers the frequency from 5 Hz to 500 MHz. It can be
used to perform signal analysis of circuits in audio,
video, HF, and VHF band.
Agilent 85024A high frequency probe permits high-frequency
probing from 300 kHz to 3 GHz without adverse loading
of the circuit under test.
Rack slide kit (p/n 1494-0060) provides the hardware to adapt rack
mount kits (Options 908 and 909) for mounting the
analyzer in an Agilent system II cabinet.
Agilent 1182A testmobile provides a sturdy, mobile platform for your
analyzer.
Chapter 8
Options and Accessories
Accessories Available
663

Advertisement

Table of Contents
loading

Table of Contents