Agilent Technologies 8560E User Manual page 200

Key Function Descriptions
Key Function Tables
Table 4-4 Control Functions
Control Keys
CF STEP AUTO MAN
CHAR SET 1 2
CLEAR WRITE A
CLEAR WRITE B
DETECTOR MODES
DETECTOR NEG
PEAK
DETECTOR NORMAL
DETECTOR POS PEAK
DETECTOR SAMPLE
DISPLAY
DLY SWP [
DLY SWP ON OFF
DSPL LIN ON OFF
EDGE POL POS NEG
ERASE TITLE
200
Access Key
AUTO COUPLE
DISPLAY
TRACE
TRACE
TRACE
TRACE
TRACE
TRACE
TRACE
—
]
SWEEP
SWEEP
DISPLAY
SWEEP
DISPLAY
Description
Adjusts the center frequency step size so
that when a step key is pressed, the center
frequency shifts by the selected step size.
Accesses character sets used for creating
titles.
Clears trace A and sets it to accept and
display new input-signal data continuously.
Clears trace B and sets it to accept and
display new input-signal data continuously.
Accesses a menu of detector modes.
Selects negative-peak detection of the video
signal and places a D on the left side of the
display.
The normal-detector mode alternately
displays positive and negative-peaks when
the presence of noise is detected, and
displays positive peaks otherwise.
Selects positive-peak detection of the video
signal and places a D on the left side of the
display.
Samples the video signal and places a D on
the left side of the display.
Accesses a menu of display related
functions.
Delays the start of the sweep until the
specified time elapses after the trigger
event (or before with Option 007.)
Turns on and off the function which delays
the start of the sweep until after the trigger
event. With Option 007 the sweep can be
started before the trigger event.
Switches the display line on and off.
Selects the polarity for edge triggering of a
gated measurement.
Erases the current title from the display.
Chapter 4