Figure 5-4 Output Statement Example (Iii) - Agilent Technologies 8560E User Manual

Programming
Communication with the System
Figure 5-4 Output Statement Example (III)
GPIB
The value of the center frequency above is placed in the variable named
"Center." The variable can be printed, stored, or used for other
computer functions.
Syntax Requirements
All of the program examples in this manual show recommended
command syntax. All spectrum analyzer commands must be
constructed according to specific syntactical rules that are outlined in
Chapter 7, "Language Reference." Chapter 7 lists all of the remote
spectrum analyzer commands in alphabetical order, and contains a
syntax diagram for each command. Refer to Chapter 6 for a complete
command listing of all valid remote commands sorted by function,
rather than alphabetically.
Chapter 5 295