St Sweep Time; Figure 7-263 St Syntax - Agilent Technologies 8560E User Manual

Agilent technologies 8560 e-series and ec-series spectrum analyzers

Table of Contents

Language Reference

ST Sweep Time

Figure 7-263

The ST command sets the sweep time. This is normally a coupled

function that is automatically set to the optimum value allowed by the

current instrument settings. Alternatively, you can specify the sweep

time. Note that when the speciﬁed sweep time is too fast for the current

instrument settings, the instrument is no longer calibrated and the

message MEAS UNCAL appears on the display.