Table of Contents
Advertisement
Table 6-2
Programming Command Functional Index
Function
Category
TRACE
TRACE MATH
TRACE
PROCESSING
TRIGGER
Chapter 6
Command
Corresponding Key
Function
DET
DETECTOR MODES
AMB
A−B→A ON OFF
AMBPL
A−B+DL→A ON OFF
A+B → A
APB
AXB
A EXCH B
B−DL → B
BML
BLANK
BLANK A BLANK B
CLRW
CLEAR WRITE A CLEAR
WRITE B
MINH
MXMH
MAX HOLD A
MAX HOLD B
NORMLIZE
NORMLIZE ON OFF
NRL
NORM REF LVL
RCLT
RECALL TO TRA
RECALL TO TRB
SAVET
SAVE TO TRA
SAVE TO TRB
TRA
TRB
VAVG
VID AVG ON OFF
VIEW
VIEW A
VIEW B
CONTS
SWEEP CONT SGL
(CONT)
SNGLS
SWEEP CONT SGL (SGL) Selects single sweep mode (S2).
TM
FREE RUN VIDEO LINE
EXTERNAL
TRIGPOL
TRIG POL POS NEG
VTL
VIDEO
Programming Command Cross Reference
Programming Command Versus Front Panel Key
Description
Specifies video detector type.
A − B into A (C1 and C2).
A − B + DL into A.
A + B into A.
Exchanges A and B (EX).
B − DL into B (BL).
Stores and blanks specified trace
register (A4 and B4).
Clear-writes specified trace
register (A1 and B1).
Holds the minimum trace register
values.
Max-holds the specified trace
register (A2 and B2).
Activates normalization routine.
Sets the normalized reference
level.
Recalls specified trace data.
Saves specified trace data.
Selects input and output of trace
A.
Selects input and output of trace
B.
Turns video averaging on or off.
Views specified trace register (A3
and B3).
Selects continuous sweep mode
(S1).
Selects trigger mode: free run (T1),
video (T4), line (T2), external (T3).
Selects the edge (positive or
negative) of the trigger input that
causes the trigger event.
Video trigger level.
361
Advertisement
Table of Contents
