Agilent Technologies 8560E User Manual page 704

Agilent technologies 8560 e-series and ec-series spectrum analyzers

Table of Contents

If You Have a Problem

Error Messages

SYSTEM Hardware/ﬁrmware interaction, ﬂoating

overﬂow; check other errors.

SYSTEM Hardware/ﬁrmware interaction, ﬂoating

underﬂow; check other errors.

SYSTEM Hardware/ﬁrmware interaction, LOG error;

check other errors.

SYSTEM Hardware/ﬁrmware interaction, Integer overﬂow;

check other errors.

SYSTEM Hardware/ﬁrmware interaction, squareroot error;

check other errors.

SYSTEM Hardware/ﬁrmware interaction, Triple overﬂow;

check other errors.

SYSTEM Hardware/ﬁrmware interaction, BCDL overﬂow;

check other errors.

SYSTEM Unknown system error.

SYSTEM Hardware/ﬁrmware interaction. Code invoked for

wrong instrument.

NO FADC The power-on read of the fast analog to digital

converter hardware is failing.

This error applies applies only to EC-series analyzers

and E-series analyzers with fast ADC (Option 007)

Error codes 800 through 899, MODULE, are reserved for option

modules, such as the Agilent 85629B test and adjustment module or

the Agilent 85620A mass memory module. Refer to the option module

manual for a list of product-speciﬁc error messages.

Error codes 900 to 910 relate to user-generated errors. These

errors occur if the operator has entered information incorrectly, or is

attempting to use the analyzer inappropriately.

TG UNLVL Tracking generator output is unleveled.

TGFrqLmt Tracking generator output unleveled because

START FREQ is set below tracking generator

frequency limit (300 kHz).