Ss Center Frequency Step-Size; Figure 7-261 Ss Syntax - Agilent Technologies 8560E User Manual

Agilent technologies 8560 e-series and ec-series spectrum analyzers

Table of Contents

Language Reference

SS Center Frequency Step-Size

Figure 7-261

The SS command sets the center frequency step-size. This is normally a

coupled function. After entering a step size, execute the CF command

using the UP or DN parameter. The center frequency is adjusted by the

selected step size. This function is useful for quickly tuning to the

harmonics of an input signal. The default value is 10 percent of span.

When the span is 0 Hz, the default value is one-fourth of the resolution