Marker; Marker Indicator; Marker Value; Menu Bar - Agilent Technologies ENA Series Installation And Quick Start Manual

Quick Start Guide
Names and Descriptions of E5061A/E5062A parts

1. Menu Bar

Using a menu bar, you can perform the same operations as when using the keys in the
ACTIVE CH/TRACE Block, RESPONSE Block, STIMULUS Block, MKR/ANALYSIS
Block, and INSTR STATE Block on the front panel of the E5061A/E5062A.
2. Data Entry Bar
Using the data entry bar, you can enter numeric data or label names.

3. Channel Title Bar

Using the channel title bar, you can cause a title arbitrarily entered by the user to appear on
each channel.

4. Softkey Menu

A group of softkeys used for specifying the setup of the E5061A/E5062A.

5. Trace Bar

Displays the settings for each trace (from left: trace number, S-parameter, data format, and
scale). Using the mouse, you can also select the active trace.

6. Marker Indicator

Indicates a marker position on the horizontal axis.

7. Marker Value

Displays the stimulus value and response value of each marker. Symbol > displayed to the
left of a marker number indicates that that marker is the active marker. When the reference
marker is set ON, symbol Δ is displayed instead of the marker number and indicates the
marker value of the reference marker. When the reference marker is set ON, the stimulus
value and response value of other markers indicate the differences from the values of the
reference marker.

8. Reference Line Indicator

Displays the position of the reference line.

9. Marker

Used for reading out values on a trace. Using a marker makes it easy to analyze
measurement results or change stimulus settings. The active marker is represented with an
inverted triangle.
10. Channel Status Bar
Displays channel-specific information on the E5061A/E5062A for each channel. This
information consists of the channel number, the start frequency (center frequency), the stop
frequency (span frequency), ON/OFF of the error correction function, and whether or not
the sweep is in progress. When the averaging function is ON, the channel status bar also
displays that information.

11. Instrument Status Bar

Displays the information on the status of the E5061A/E5062A that is common to all
channels.
46 Chapter 3