Aggregated-Ether-Options - Juniper EX9200 Features Manual

Virtual Chassis Feature Guide for EX9200 Switches

aggregated-ether-options

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
92

aggregated-ether-options {

ethernet-switch-profile {
tag-protocol-id;
}
(flow-control | no-flow-control);
lacp {
(active | passive);
admin-key key;
periodic interval;
system-id mac-address;
}
(link-protection | no-link-protection);
link-speed speed;
local-bias;
logical-interface-fpc-redundancy;
(loopback | no-loopback);
mc-ae {
chassis-id chassis-id;
events {
iccp-peer-down {
force-icl-down;
prefer-status-control-active;
}
}
init-delay-time seconds;
mc-ae-id mc-ae-id;
mode (active-active | active-standby);
redundancy-group group-id;
revert-time revert-time;
status-control (active | standby);
switchover-mode (non-revertive |revertive);
}
minimum-links number;
system-priority
}
[edit interfaces aex]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 12.3R2.
Configure the aggregated Ethernet properties of a specific aggregated Ethernet interface.
The remaining statements are explained separately. See
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
.
CLI Explorer
Copyright © 2017, Juniper Networks, Inc.