Table 12: Lcd Panel Menu Options In Ex4300 Switches - Juniper EX4300 Hardware Manual

EX4300 Switch Hardware Guide

Table 12: LCD Panel Menu Options in EX4300 Switches

Menu Label Description
IDLE In the Idle menu:
Press Enter to cycle through the Status LED modes, which are port status indicators:
ADM (administrative status)
DPX (duplex)
SPD (speed)
POE (Power over Ethernet) (only for EX4300-24P, EX4300-24P-S, EX4300-48P, and EX4300-48P-S
models)
See "Network Port, Built-In QSFP+ Port, Uplink Port, and Uplink Module Port LEDs on EX4300 Switches"
on page 39
Press Menu to exit the Idle menu and go to the Status menu.
STATUS In the Status menu, press Menu to cycle through the following information:
VCPs status: Up or Down
Display the status of VCPs on the switch. This option is supported only on EX4300 switches in a Virtual
Chassis configuration. This option is not supported on standalone EX4300 switches.
Power supply status: OK, Failed, or Absent
Fan status and Temperature status.
Fan status: OK, Failed, or Absent
Temp status: OK, High, or Shutdown
Junos OS version for EX Series switches loaded on the switches.
EXIT STAT MENU?
Choose one of the following:
Press Enter to exit the Status menu and go to the Maintenance menu.
Press Menu to display the VCPs status again.
You can disable the Status menu or the options in the Status menu in the LCD panel. See
LCD Panel on EX Series Switches (CLI Procedure)" on page
30
for information about the Status LED modes.
223.
Copyright © 2017, Juniper Networks, Inc.
"Configuring the