Table 11: Lcd Panel Menu Options For The Ex6200 Switch - Juniper EX6210 Complete Hardware Manual

Complete Hardware Guide for EX6210 Ethernet Switches

Table 11: LCD Panel Menu Options for the EX6200 Switch

Menu Description
Idle In the Idle menu:
Press
Enter
ADM (enabled/disabled)
SPD (speed)
DPX (duplex)
POE (Power over Ethernet)
See "Network Port LEDs in an EX6200 Switch" on page 36
Press
Menu
Status The Status menu has the following options:
Power supply status—Choose one of the following:
Press
Enter
Press
Menu
Environment status—Choose one of the following:
Press
Enter
Fan tray status: OK, Fld, ABS
Chassis temperature status: OK, High, Shutdown
Press
Menu
Junos OS version status—Choose one of the following:
Press
Enter
Press Menu
EXIT STAT MENU?—Choose one of the following:
Press
Enter
Press
Menu
If you do not want users to use Status menu options, disable the entire menu or individual menu options. See
Configuring the LCD Panel on EX Series Switches (CLI Procedure).
22
to cycle through the Status LED modes, which are port status indicators:
to exit the Idle menu and go to the Status menu.
to display the status of power supplies 0, 1, 2, and 3: OK, Fld (Failed), ABS (Absent).
to go to the next option in the Status menu.
to display the status of the fan tray and the chassis temperature:
to go to the next option in the Status menu.
to display the version of Junos OS for EX Series switches loaded on the switch.
to go to the next option in the Status menu.
to exit the Status menu.
to return to the Switch fabric status option.
for information on the Status LED.
Copyright © 2014, Juniper Networks, Inc.